Pos:  Knrr Miracel2 network cabinet:
Dismountable universal stand made from extruded 
aluminum sections consisting of inserted aluminum die 
cast corner connections and horizontal and vertical 
aluminum sections with circumferential T grooves for 
the attachment of cabinet accessories, cable guides, 
rails, bars and other accessories. Cable inlets possible 
through cover and base. Cabinets may be stacked side 
by side, without side plates if required. The cabinets are 
compatible with a similar heavy-duty cabinet with a 
bearing load of up to 1,500kg and its accessories. The 
19" extrusions section models according to IEC 297-3 
are available as server or breadboard sections with U 
dimensions consisting of steel panels and as aluminum 
T-grooves to house spring nuts. The depth of the 19" 
sections can be adjusted continuously in the front and 
rear of the cabinet.
Front doors with glass panels made from 4 mm 
incombustible tempered safety glass. Rear doors made 
from steel panels with powder coating. Front and rear 
doors each comprise three hinges with a 160 opening 
angle (individual cabinet) with a 180 opening angle 
available as an option. Both doors have a three-point or 
four-point locking system with a lever for the inclusion of 
a closing cylinder or security lock. The door stop can be 
replaced on site. The doors may be assembled either 
on the front or rear of the cabinet. 160 doors may be 
dismantled and assembled without tools. The doors are 
also available as double-wing glass or steel sheet doors 
with or without perforation. 
Top cover: with rear cable inlet consisting of 3 plastic 
sliding plates (UL094V0) to be opened fully to allow for 
assembly or dismantling of cover after cabling. The 
cable inlet has a minimum opening of 435x115mm and 
can be fully dismantled. The cable inlets are also 
available in the form of brush strips at the front or on the 
left and right.  Side panels: may be mounted in the T-
groove of the base frame and attached with quick 
release fasteners in the vertical T-grooves of the 
cabinet or may be screwed onto the cabinet frame, 
earthed and prepared for closing cylinders.
The optional bottom plates may comprise cable inlets 
with foam rubber seals or brush strips and may either 
be perforated or available as a closed design. 
The bottom plates consist of several sections so that 
the cable inlets can be positioned individually.
Plinth: comprises front and rear ventilation slits, 
possibility of retrofitting a filter mat. All 4 side panels on 
the plinth may be removed by means of a quick release 
fastener if required. 
The cabinet may be equipped with cable managers 
covering the entire height which are available in vertical 
and horizontal (19") designs. A vertical cable managers 
comprise 3 cable ducts which may be covered with 
bush strips or blanking plates. The entire height of the 
cabinet front may be fitted with air partitioning steel 
sheets for the partitioning of the internal air. The latter 
are available with additional 3x 19" 1U vertical sections 
which are covered with blanking plates. The air 
partitioning steel sheets can be adjusted continuously 
with the front 19" sections.
A series of cabinets with air partitioning may also be 
available without side sections. Partition panels may be 
assembled afterwards between these cabinets in order 
to separate them.
Additional components such as doors, side sections, 
covers and bases are earthed by means of earth 
conductors according to DIN EN60950 and VDE 0100 
T450.

Loading capacity 8000N static.
Protection type. IP-20 EN60529
Verifications: Earthing according to VDE 0100 T 540. 
DIN EN60950.
Material / surface:
Base frame: Aluminum
Cover parts: galvanized steel sheet, powder-coated 
structure.
Doors: Steel sheet, powder-coated structure.
19 galvanized steel sheet section, 1.5mm.

Scope of delivery:
1 x aluminum base frame
2 x 19 steel sheet breadboard sections at the front, 
with U-labeling for the assembly of standard 19" 
components.
2 x side panels with quick release fasteners.
1 x top cover with rear cable inlet (three-part sliding 
plate to be opened fully).
1 x single-leaf front door with 4mm safety glass with a 
lever for the inclusion of a closing cylinder.
1 x single-leaf rear door made from steel sheets with 
powder coating with a lever for the inclusion of a closing 
cylinder.
1 x 100 mm high base with front and rear ventilation 
slits, closed at the side.
1 x complete earthing set (VDE 0100).
4 x leveling feet.

Installation height: 2095mm, 47U
Cabinet dimensions:
Height including 100 mm base: 2340mm 
Width: 800mm
Depth: 600mm
Weight: 96kg
 
Maneuvering room: from front doors to 19" front 
sections 123 mm
Color of cover parts RAL 7035 light gray =.1 or .RAL 
7021 =.8 dark gray. Instead of .x in the order number  

Manufacturer: Knrr GmbH
Type: Miracel2  network cabinet
Delivery status: Fully mounted, screwed onto 
disposable pallet with lightweight packaging

Item number: 01.157.005.x.032
or equivalent

Unit    Quantity    Unit price (UP)    Total price (TP)

_____     _____     ___________        ______________

